Leveling agent for powder coating/ flowing agent for powder coating
JD-P688 Flow agent is a kind of polyacrylate with silica as carrier which is composed by a special process. It can be applied to Polyester/TGIC system, Epoxy system, All kinds of heat resistant powder coatings. It has good effect on the elimination of surface defects, such as orange peel, shrink hole, hole, etc, has leveling and brightening effect.
The addition amount of flow agent is between 0.5 ~ 1%. The optimum dosage of additive must be determined by separate experiments.
It`s applicable to the pure epoxy, ring polymer hybrid, P/TGIC, P/ hydroxyl alkyl amide, polyurethane acrylate system, so called general flow agent.
AppearanceWhite sticky powder
Active ingredients≥ 65%
Non volatile≥ 98.5
Packaging and storage
Polyethylene Lined kraft paper bag, 25KG/ bag. Stored in a cool and dry place, valid for 12 months at room temperature. Close immediately after use, keep it away from fire. Break up the agglomeration can be used.
|White sticky powder|